2019 Baileigh TS-1248P-52 Woodworking Cabinet Table Saw 52" Max Cut w/DRO

Description

DESCRIPTION With an all-steel base attached to a massive, vibration-reducing trunnion, this industrial table saw can cut thousands of feet of board per day. 52” right-side rip capacity lets you tackle long pieces of material. 5 hp Leeson motor turns at 3600 rpm. Accepts standard 12” blades with a 1” arbor that can tilt 45°to the left. Run on 220-volt single-phase power, so it’ll work almost anywhere. 48” x 30” work table with 52” extensions. Both the table and its extensions are made from precision-ground cast iron. Table surface will stay square because of webbed or criss-cross design on the bottom that meshes into the base. The tabletop won’t warp in spite of heat and moisture. Smoothly finished table allows wood to slide without resistance. There’s no unevenness to compromise the accuracy of your cut. You can polish the cast-iron table up and restore the original shine even after years of hard use. Rip fence made of heavy UMHW plastic that you can cheaply replace if you cut into it. Rip fence incorporates a digital readout (DRO) for rip capacity. Just “zero” the DRO at the blade to get a perfect, repeatable length every time. Steel handwheels, for adjusting blade height and miter angle, are located on the base. Rack and pinion mechanism makes it easy to move the blade up and down. Comes with a simple miter gauge on the tabletop and DRO for the bevel angle on the base to help with repeatability. Massive steel trunnion is attached to the base, so the machine won’t wobble or exceed safe noise levels. Rigid all-steel base maintains accurate alignment and keeps vibrations down to a minimum. Dust shroud inside the machine collects sawdust from under the blade and funnels it to the 4” port. Just hook up an extraction system. CSA-approved. 4-piece safety blade guard with anti-kickback reverse teeth. Riving knives for both dado and regular cut-through will help spread the wood and prevent pinching or twisting. Specifications Item Number TS-1248P-52 Table Size (Length) 24.4" Table Size (Width) 30.7" Table Saw Working Table 64.4" x 30.7" Table Saw Blade Diameter 12" Table Saw RPM 3600 Table Saw Arbor 1" Table Saw Cutting Height @ 90° 4" Table Saw Cutting Height @ 45° 2-3/4" Maximum Dado Diameter 8" Maximum Dado Width 13/16" Maximum Rip Cut (Right) 52" Power 220V Single Phase Horse Power 5 Weight (lbs) 700 SHIPPING OPTIONS: Regular Truck Freight: Contact for Quote Local Pickup: FREE International Shipping: Please contact for Quote Mullett Industrial Sales contact info: ​mark at mullettindustrialsales.com ​Office: 313.444.3268 ​Also please check out our website!
DESCRIPTION
With an
all-steel base
attached to a massive, vibration-reducing trunnion, this industrial table saw can
cut thousands of feet of board per day
.
52” right-side rip
capacity lets you tackle long pieces of material.
5 hp
Leeson motor turns at
3600 rpm
.
Accepts standard
12” blades
with a 1” arbor that can
tilt 45°
to the left.
Run on
220-volt single
-phase power, so it’ll work almost anywhere.
48” x 30” work table
with 52” extensions.
Both the table and its extensions are made from
precision-ground cast iron
.
Table
surface will stay square
because of webbed or criss-cross design on the bottom that meshes into the base.
The tabletop won’t warp in spite of heat and moisture.
Smoothly finished table
allows wood to slide without resistance. There’s no unevenness to compromise the accuracy of your cut.
You can polish the cast-iron table up and
restore the original shine
even after years of hard use.
Rip fence made of heavy UMHW plastic
that you can cheaply replace if you cut into it.
Rip fence incorporates a
digital readout (DRO)
for rip capacity.
Just “zero” the DRO at the blade to get a
perfect, repeatable length
every time.
Steel handwheels
, for adjusting blade height and miter angle, are located on the base.
Rack and pinion mechanism
makes it easy to move the blade up and down.
Comes with a simple
miter gauge
on the tabletop and
DRO for the bevel angle
on the base to help with repeatability.
Massive steel
trunnion is attached to the base
, so the machine won’t wobble or exceed safe noise levels.
Rigid all-steel base
maintains accurate alignment and keeps vibrations down to a minimum.
Dust shroud inside the machine
collects sawdust from under the blade and funnels it to the 4” port. Just hook up an extraction system.
CSA-approved.
4-piece safety
blade guard
with anti-kickback reverse teeth.
Riving knives
for both dado and regular cut-through will help spread the wood and prevent pinching or twisting.
Specifications
Item Number TS-1248P-52
Table Size (Length) 24.4"
Table Size (Width) 30.7"
Table Saw Working Table 64.4" x 30.7"
Table Saw Blade Diameter 12"
Table Saw RPM 3600
Table Saw Arbor 1"
Table Saw Cutting Height @ 90° 4"
Table Saw Cutting Height @ 45° 2-3/4"
Maximum Dado Diameter 8"
Maximum Dado Width 13/16"
Maximum Rip Cut (Right) 52"
Power 220V Single Phase
Horse Power 5
Weight (lbs) 700
SHIPPING OPTIONS:
Regular Truck Freight:
Contact for Quote
Local Pickup:
FREE
International Shipping:
Please contact for Quote
Mullett Industrial Sales contact info:
​mark at mullettindustrialsales.com
​Office: 313.444.3268
​Also please check out our website!
Images sell!
Get Supersized Images & Free Image Hosting
The complete eBay Selling Solution.
Track Page Views With
Auctiva's FREE Counter